Alguem emensina a instalar o roteador NetGear WGR614?

.http://www.youtube.com/view_play_list?p=E75F125C424860DD

ai fica facil

Conecte seu modem do velox ao pc, faça a conecção no seu provedor de internet depois insira o cd de instalação do netgear no drive, sem conectar o roteador ele será conectado durante a instalação. Voce sera conectado ao site de instalação siga as instruções do site que vai funcionar

Configuring your NETGEAR router for DSL Internet connection

How to configure internet access on a NETGEAR router for DSL connection?

Note:

* The information in this article applies if you are trying to configure your DSL connection with a NETGEAR router.
* If you have a Cable Internet Connection, see this article

Installation Procedure:

1. Connect the Modem to the Internet port of the NETGEAR router and the computer to any of the four LAN ports as shown in the diagram.
Image
2. Open an Internet Explorer browser and type the router IP address which would be either http://192.168.0.1 or http://192.168.1.1 in the address bar and press Enter.
3.
* The Login window will prompt for the router configuration username and password.
* The default username is “admin” and the default password is “password”
Image
4. Click Setup Wizard on the top left corner, Select Yes for the Setup Wizard to detect the type of internet connection and click Next.
Image
5. The Setup Wizard will detect the type of Internet connection. DSL connections which require a login to connect to the internet will be detected as PPPoE. Click Next
Image
6. Configure your router with the username and password provided by your ISP and click Apply.
Image
7. The router will now save these settings. When complete, you can verify whether you are connected to the internet from the Router Status > Maintenance menu.
Image
Verify you have a valid IP address (not-blank / 0.0.0.0) on the Internet Port assigned by your ISP

For additional troubleshooting, refer to: Troubleshooting No Internet Through the Router